netsukuku

http://netsukuku.freaknet.org

What is this?

Netsukuku is an alternative to the internet, It will have all of the features of the internet, Such as websites, Instant messaging, File transfers, DNS, Etc. It functions as a mesh network or a p2p net system that generates and sustains itself autonomously. It is designed to handle an unlimited number of nodes with minimal CPU and memory resources.

Thanks to this feature it can be easily used to build a worldwide distributed, anonymous and decentralised network, separated from the Internet, without the support of any servers, ISPs or authorities.

This net is composed by computers linked physically each other, Therefore it isn’t build upon any existing network. Netsukuku builds only the routes which connects all the computers of the net. Although it can route through the internet if needed. In other words, Netsukuku replaces the level 3 of the model iso/osi with another routing protocol.

The Domain Name System is also replaced by a decentralised and distributed system, Being the ANDNA system. (A Netsukuku Domain Name Architecture)

The complete features list of Netsukuku is here: http://netsukuku.freaknet.org/files/doc/misc/Ntk_features_list

For Documentation, Please read this!

http://netsukuku.github.io/netsukuku/annotated.html

Just search what ever you want to know, And be amazed with doxygen’s glory! ^-^

In order to join to Netsukuku, Just install it and run it! Connect as many nodes together as you want!

Build and install

Get the code!

git clone git@github.com:Netsukuku/netsukuku.git 

The dependencies of netsukuku can be installed by running this command.

sudo apt-get install zlibc libgmp-dev openssl libssl-dev libgee-dev libpth-dev libgcrypt11-dev autoconf cmake autogen mawk gawk

To compile the code you can do this:

autoreconf -i
./configure && make 
sudo make install

Once installed

In order to start netsukuku on eth0, It is preferred to run:

sudo ntkd -D -i eth0 -dd

CURRENTLY NON-FUNCTIONAL:

However, There are more options, Such as:

sudo ntkd -D -i eth0 -r -I -dd

This will run netsukuku in restricted mode and share your internet connection.

(Netsukuku should be able to use any network interface you have, Even VPNs that emulate ethernet such as tinc.)

Manual Dependencies

You can manually download the dependencies of netsukuku if you want, Or use them for development.

Here they are!

for the libgmp: https://gmplib.org/ the openssl library here: http://openssl.org the zlibs: http://zlib.net gawk: http://www.gnu.org/software/gawk/ libgcrypt: https://www.gnu.org/software/libgcrypt/ libpth: http://www.gnu.org/software/pth/ libgee: https://wiki.gnome.org/Projects/Libgee

Old stuff

You can use this, But, I don’t know if it works anymore.

SCons is a cooler way to install netsukuku: http://www.scons.org/ (You should have installed at least the 2.4 version of Python in order to avoid dirty bugs in scons)

Then go in the src/ directory and type:

$ scons --help

That will show you all the options you can use in the build and installation process. Finally execute:

$ scons

The code will be compiled. If all went well install NetsukukuD with:

# scons install

Now you should give a look at /etc/netsukuku.conf (or wherever you installed it) and modify it for your needs, but generally the default options are good.

• Notes:

If you want to change some scons option to do another installation, (i.e. you may want to reinstall it with another MANDIR path), you have to run:

$ scons --clean

Static Binaries and Packages

These packages are old, We will update them soon, Or you can if you want.

If you prefer to just install Netsukuku, without compiling it, you can download the static binaries suitable to your platform. They come packed in various formats (.tgz, .deb, .ipk). The packages repository is at:

http://netsukuku.freaknet.org/packages/ (Currently non-functional)

https://launchpad.net/~michele-bini/+archive/ppa-mbxxii/+sourcepub/1032974/+listing-archive-extra

(This archive contains unoffical packages, However, They have been tested, And function on Ubuntu 12.04 and earlier.)

Kernel dependencies

I’m not sure if we need to do any of this anymore, But it is probably useful.

(The following probably is already, If not will be soon, Unnecessary/automated.)

On Linux be sure to have the following options set in your kernel .config. These options are taken from linux-2.6.14.

Networking options

CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_NET_IPIP=y
CONFIG_NETFILTER=y

and these from linux-2.6.16.19.

Core Netfilter Configuration

(I vaugely remember getting a conntrack error in the past, But it is gone now.)

CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
NETFILTER_XT_TARGET_CONNMARK=y

IP: Netfilter Configuration

CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_NAT=y
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=y

If you are using modules you have to load them before launching the daemon.

How to use it

Before doing anything do:

$ man ntkd
$ man andna

when you feel confortable and you are ready to dare run as root:

# ntkd

then just wait… ^_-

(For the first times it’s cool to use the -D option to see what happens).

• Note: The daemon at startup takes the list of all the network interfaces which are currently UP and it uses all of them to send and receive packets. If you want to force the daemon to use specific interfaces you should use the B<-i> option.

Where to get in touch with us

IRC

This is still true and active! Please join!

We live night and day in IRC, come to see us on channel #netsukuku on the FreeNode irc server (irc.freenode.org).

Mailing list

These mailing list should mostly still work, But they are not very active.

Subscribe to the netsukuku mailing to get help, be updated on the latest news and discuss on its development.

To subscribe to the list, send a message to: netsukuku-subscribe@lists.dyne.org or use the web interface: http://lists.dyne.org/mailman/listinfo/netsukuku

You can browse the archive here: http://lists.dyne.org/netsukuku/ http://dir.gmane.org/gmane.network.peer-to-peer.netsukuku

How to donate

We love netsukuku, However, We can’t work on it if we don’t have money for an internet connection, Or money for food. Not all of us are not traditionally employed, And we need donations to continue being able to work, And devote as much time as we can to this wonderful project!

This project is a dream come true for many of us, And we would love it if you would help us mantain this dream for as long as possible! Thank you for reading. :)

[We will distribute any donated money amongst ourselves, and take that as incentive to work harder on the project. However, We will, Also, Provide additional crypto currency addresses if you want to donate to a specific person, Or prefer crypto-currencies.]

• Jercos’ Bitcoin Address (1BAbi4aHjdN7znNLuDa6dgs4rZLU3Tq9ka)
• MissValeska’s Bitcoin Address (1Py3CmmaDk2bCUsLGprFkewGQunaKB7jmv)
• MissValeska’s Litecoin Address (LcjJW2hDHS9oCxCWAb3WLexyJECSZ2Rp2s)
• Communial Paypal Account

Bug report

{ Don’t panic! }

If you encounter any bug, please report it. Use the online bug track system: https://github.com/Netsukuku/netsukuku/issues

The rest is inactive, Please just use the link above until further notice.

http://bugs.dyne.org/ or the mailing list: http://lists.dyne.org/netsukuku/ and explain what the problem is and if possible a way to reproduce it.

Hack the code

Feel free to debug, patch, modify and eat the code. Then submit your results to the mailing list. ^_-

However, It is preferred that you make your own github fork, And show it to us in the IRC or issues page. Although, For smaller changes, You could use pastebin.com But please note! Tell us exactly which file you are editing in pastebin, And tell us which line you are editing.

There is a lot to code too! If you are a Kung Foo coder, get on board and help the development! For a start you can take a look at the src/TODO file.

Still valuable! ^^^^

License and that kind of stuff…

All the Netsukuku code is released under the GPL-2, please see the COPYING file for more information.

The authors of Netsukuku and NetsukukuD are listed in the file AUTHORS.

This should be ammended in the future, As more authors come on-board.