Memory Management Error fixes

src/Makefile.in

@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.8.5 from Makefile.am.
+# Makefile.in generated by automake 1.13.3 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004  Free Software Foundation, Inc.
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -14,17 +14,57 @@
 
 @SET_MAKE@
 
-SOURCES = $(ntk_resolv_SOURCES) $(ntkd_SOURCES)
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
 VPATH = @srcdir@
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ..
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
 install_sh_SCRIPT = $(install_sh) -c
@@ -36,20 +76,21 @@ POST_INSTALL = :
 NORMAL_UNINSTALL = :
 PRE_UNINSTALL = :
 POST_UNINSTALL = :
+build_triplet = @build@
 host_triplet = @host@
 bin_PROGRAMS = ntkd$(EXEEXT) ntk-resolv$(EXEEXT)
 subdir = src
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
-	$(srcdir)/config.h.in TODO
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
+	$(srcdir)/config.h.in $(top_srcdir)/depcomp TODO
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
-mkinstalldirs = $(mkdir_p)
+mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 am__installdirs = "$(DESTDIR)$(bindir)"
-binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
 PROGRAMS = $(bin_PROGRAMS)
 am_ntk_resolv_OBJECTS = andns_lib.$(OBJEXT) ntkresolv.$(OBJEXT) \
 	andns_net.$(OBJEXT) crypto.$(OBJEXT) snsd_cache.$(OBJEXT) \
@@ -74,52 +115,111 @@ am_ntkd_OBJECTS = accept.$(OBJEXT) map.$(OBJEXT) misc.$(OBJEXT) \
 	netsukuku.$(OBJEXT) mark.$(OBJEXT) libip4tc.$(OBJEXT)
 ntkd_OBJECTS = $(am_ntkd_OBJECTS)
 ntkd_DEPENDENCIES =
-DEFAULT_INCLUDES = -I. -I$(srcdir) -I.
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+DEFAULT_INCLUDES = -I.@am__isrc@
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
-@AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/accept.Po ./$(DEPDIR)/andna.Po \
-@AMDEP_TRUE@	./$(DEPDIR)/andna_cache.Po ./$(DEPDIR)/andns.Po \
-@AMDEP_TRUE@	./$(DEPDIR)/andns_lib.Po ./$(DEPDIR)/andns_net.Po \
-@AMDEP_TRUE@	./$(DEPDIR)/andns_snsd.Po ./$(DEPDIR)/bmap.Po \
-@AMDEP_TRUE@	./$(DEPDIR)/buffer.Po ./$(DEPDIR)/conf.Po \
-@AMDEP_TRUE@	./$(DEPDIR)/crypto.Po ./$(DEPDIR)/daemon.Po \
-@AMDEP_TRUE@	./$(DEPDIR)/dns_wrapper.Po ./$(DEPDIR)/dnslib.Po \
-@AMDEP_TRUE@	./$(DEPDIR)/endianness.Po ./$(DEPDIR)/err_errno.Po \
-@AMDEP_TRUE@	./$(DEPDIR)/gmap.Po ./$(DEPDIR)/hash.Po \
-@AMDEP_TRUE@	./$(DEPDIR)/hook.Po ./$(DEPDIR)/if.Po \
-@AMDEP_TRUE@	./$(DEPDIR)/igs.Po ./$(DEPDIR)/inet.Po \
-@AMDEP_TRUE@	./$(DEPDIR)/iptunnel.Po ./$(DEPDIR)/ipv6-gmp.Po \
-@AMDEP_TRUE@	./$(DEPDIR)/krnl_route.Po ./$(DEPDIR)/krnl_rule.Po \
-@AMDEP_TRUE@	./$(DEPDIR)/libip4tc.Po ./$(DEPDIR)/libnetlink.Po \
-@AMDEP_TRUE@	./$(DEPDIR)/libping.Po ./$(DEPDIR)/ll_map.Po \
-@AMDEP_TRUE@	./$(DEPDIR)/llist.Po ./$(DEPDIR)/log.Po \
-@AMDEP_TRUE@	./$(DEPDIR)/map.Po ./$(DEPDIR)/mark.Po \
-@AMDEP_TRUE@	./$(DEPDIR)/misc.Po ./$(DEPDIR)/netsukuku.Po \
-@AMDEP_TRUE@	./$(DEPDIR)/ntkresolv.Po ./$(DEPDIR)/pkts.Po \
-@AMDEP_TRUE@	./$(DEPDIR)/qspn.Po ./$(DEPDIR)/radar.Po \
-@AMDEP_TRUE@	./$(DEPDIR)/rehook.Po ./$(DEPDIR)/request.Po \
-@AMDEP_TRUE@	./$(DEPDIR)/route.Po ./$(DEPDIR)/snsd_cache.Po \
-@AMDEP_TRUE@	./$(DEPDIR)/tracer.Po ./$(DEPDIR)/xmalloc.Po
+am__mv = mv -f
+AM_V_lt = $(am__v_lt_@AM_V@)
+am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
+am__v_lt_0 = --silent
+am__v_lt_1 = 
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_@AM_V@)
+am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
+am__v_CC_0 = @echo "  CC      " $@;
+am__v_CC_1 = 
 CCLD = $(CC)
 LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_@AM_V@)
+am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
+am__v_CCLD_0 = @echo "  CCLD    " $@;
+am__v_CCLD_1 = 
 SOURCES = $(ntk_resolv_SOURCES) $(ntkd_SOURCES)
 DIST_SOURCES = $(ntk_resolv_SOURCES) $(ntkd_SOURCES)
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
-	html-recursive info-recursive install-data-recursive \
-	install-exec-recursive install-info-recursive \
-	install-recursive installcheck-recursive installdirs-recursive \
-	pdf-recursive ps-recursive uninstall-info-recursive \
-	uninstall-recursive
+RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
+	ctags-recursive dvi-recursive html-recursive info-recursive \
+	install-data-recursive install-dvi-recursive \
+	install-exec-recursive install-html-recursive \
+	install-info-recursive install-pdf-recursive \
+	install-ps-recursive install-recursive installcheck-recursive \
+	installdirs-recursive pdf-recursive ps-recursive \
+	tags-recursive uninstall-recursive
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
+  distclean-recursive maintainer-clean-recursive
+am__recursive_targets = \
+  $(RECURSIVE_TARGETS) \
+  $(RECURSIVE_CLEAN_TARGETS) \
+  $(am__extra_recursive_targets)
+AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
+	distdir
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
+	$(LISP)config.h.in
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
 ETAGS = etags
 CTAGS = ctags
 DIST_SUBDIRS = $(SUBDIRS)
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
 ACLOCAL = @ACLOCAL@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
 AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 AUTOCONF = @AUTOCONF@
 AUTOHEADER = @AUTOHEADER@
 AUTOMAKE = @AUTOMAKE@
@@ -142,7 +242,9 @@ ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
+GREP = @GREP@
 IF_METHOD = @IF_METHOD@
+INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
@@ -153,6 +255,7 @@ LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
 LTLIBOBJS = @LTLIBOBJS@
 MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
 OBJEXT = @OBJEXT@
 OTHER_METHOD = @OTHER_METHOD@
 PACKAGE = @PACKAGE@
@@ -160,6 +263,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PID_DIR = @PID_DIR@
@@ -168,24 +272,29 @@ SET_MAKE = @SET_MAKE@
 SHELL = @SHELL@
 STRIP = @STRIP@
 VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
-ac_ct_STRIP = @ac_ct_STRIP@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
 am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
 bindir = @bindir@
 build = @build@
 build_alias = @build_alias@
 build_cpu = @build_cpu@
 build_os = @build_os@
 build_vendor = @build_vendor@
+builddir = @builddir@
 datadir = @datadir@
+datarootdir = @datarootdir@
 debug_flags = @debug_flags@
+docdir = @docdir@
+dvidir = @dvidir@
 exec_prefix = @exec_prefix@
 gmp = @gmp@
 host = @host@
@@ -193,21 +302,29 @@ host_alias = @host_alias@
 host_cpu = @host_cpu@
 host_os = @host_os@
 host_vendor = @host_vendor@
+htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
 libdir = @libdir@
 libexecdir = @libexecdir@
+localedir = @localedir@
 localstatedir = @localstatedir@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
+psdir = @psdir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
 sysconfdir = @sysconfdir@
 target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
 SUBDIRS = man scripts conf
 AM_CFLAGS = -g -I. @debug_flags@ -I@gmp@
 AM_CXXFLAGS = -g -I. @debug_flags@ -I@gmp@
@@ -236,14 +353,14 @@ $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
 	    *$$dep*) \
-	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
-		&& exit 0; \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  src/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --gnu  src/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu src/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu src/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -261,18 +378,17 @@ $(top_srcdir)/configure:  $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 config.h: stamp-h1
-	@if test ! -f $@; then \
-	  rm -f stamp-h1; \
-	  $(MAKE) stamp-h1; \
-	else :; fi
+	@if test ! -f $@; then rm -f stamp-h1; else :; fi
+	@if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi
 
 stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
 	@rm -f stamp-h1
 	cd $(top_builddir) && $(SHELL) ./config.status src/config.h
 $(srcdir)/config.h.in:  $(am__configure_deps) 
-	cd $(top_srcdir) && $(AUTOHEADER)
+	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
 	rm -f stamp-h1
 	touch $@
 
@@ -280,33 +396,54 @@ distclean-hdr:
 	-rm -f config.h stamp-h1
 install-binPROGRAMS: $(bin_PROGRAMS)
 	@$(NORMAL_INSTALL)
-	test -z "$(bindir)" || $(mkdir_p) "$(DESTDIR)$(bindir)"
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-	  if test -f $$p \
-	  ; then \
-	    f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
-	   echo " $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \
-	   $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \
-	  else :; fi; \
-	done
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+	fi; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p \
+	  ; then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' \
+	    -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	      echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	      $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	    } \
+	; done
 
 uninstall-binPROGRAMS:
 	@$(NORMAL_UNINSTALL)
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
-	  echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(bindir)/$$f"; \
-	done
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' \
+	`; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
 
 clean-binPROGRAMS:
 	-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
-ntk-resolv$(EXEEXT): $(ntk_resolv_OBJECTS) $(ntk_resolv_DEPENDENCIES) 
+
+ntk-resolv$(EXEEXT): $(ntk_resolv_OBJECTS) $(ntk_resolv_DEPENDENCIES) $(EXTRA_ntk_resolv_DEPENDENCIES) 
 	@rm -f ntk-resolv$(EXEEXT)
-	$(LINK) $(ntk_resolv_LDFLAGS) $(ntk_resolv_OBJECTS) $(ntk_resolv_LDADD) $(LIBS)
-ntkd$(EXEEXT): $(ntkd_OBJECTS) $(ntkd_DEPENDENCIES) 
+	$(AM_V_CCLD)$(LINK) $(ntk_resolv_OBJECTS) $(ntk_resolv_LDADD) $(LIBS)
+
+ntkd$(EXEEXT): $(ntkd_OBJECTS) $(ntkd_DEPENDENCIES) $(EXTRA_ntkd_DEPENDENCIES) 
 	@rm -f ntkd$(EXEEXT)
-	$(LINK) $(ntkd_LDFLAGS) $(ntkd_OBJECTS) $(ntkd_LDADD) $(LIBS)
+	$(AM_V_CCLD)$(LINK) $(ntkd_OBJECTS) $(ntkd_LDADD) $(LIBS)
 
 mostlyclean-compile:
 	-rm -f *.$(OBJEXT)
@@ -362,49 +499,53 @@ distclean-compile:
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xmalloc.Po@am__quote@
 
 .c.o:
-@am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(COMPILE) -c $<
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c $<
 
 .c.obj:
-@am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 libip4tc.o: libiptc/libip4tc.c
-@am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libip4tc.o -MD -MP -MF "$(DEPDIR)/libip4tc.Tpo" -c -o libip4tc.o `test -f 'libiptc/libip4tc.c' || echo '$(srcdir)/'`libiptc/libip4tc.c; \
-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libip4tc.Tpo" "$(DEPDIR)/libip4tc.Po"; else rm -f "$(DEPDIR)/libip4tc.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='libiptc/libip4tc.c' object='libip4tc.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libip4tc.Po' tmpdepfile='$(DEPDIR)/libip4tc.TPo' @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libip4tc.o `test -f 'libiptc/libip4tc.c' || echo '$(srcdir)/'`libiptc/libip4tc.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libip4tc.o -MD -MP -MF $(DEPDIR)/libip4tc.Tpo -c -o libip4tc.o `test -f 'libiptc/libip4tc.c' || echo '$(srcdir)/'`libiptc/libip4tc.c
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/libip4tc.Tpo $(DEPDIR)/libip4tc.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='libiptc/libip4tc.c' object='libip4tc.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libip4tc.o `test -f 'libiptc/libip4tc.c' || echo '$(srcdir)/'`libiptc/libip4tc.c
 
 libip4tc.obj: libiptc/libip4tc.c
-@am__fastdepCC_TRUE@	if $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libip4tc.obj -MD -MP -MF "$(DEPDIR)/libip4tc.Tpo" -c -o libip4tc.obj `if test -f 'libiptc/libip4tc.c'; then $(CYGPATH_W) 'libiptc/libip4tc.c'; else $(CYGPATH_W) '$(srcdir)/libiptc/libip4tc.c'; fi`; \
-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/libip4tc.Tpo" "$(DEPDIR)/libip4tc.Po"; else rm -f "$(DEPDIR)/libip4tc.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='libiptc/libip4tc.c' object='libip4tc.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/libip4tc.Po' tmpdepfile='$(DEPDIR)/libip4tc.TPo' @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libip4tc.obj `if test -f 'libiptc/libip4tc.c'; then $(CYGPATH_W) 'libiptc/libip4tc.c'; else $(CYGPATH_W) '$(srcdir)/libiptc/libip4tc.c'; fi`
-uninstall-info-am:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libip4tc.obj -MD -MP -MF $(DEPDIR)/libip4tc.Tpo -c -o libip4tc.obj `if test -f 'libiptc/libip4tc.c'; then $(CYGPATH_W) 'libiptc/libip4tc.c'; else $(CYGPATH_W) '$(srcdir)/libiptc/libip4tc.c'; fi`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/libip4tc.Tpo $(DEPDIR)/libip4tc.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='libiptc/libip4tc.c' object='libip4tc.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libip4tc.obj `if test -f 'libiptc/libip4tc.c'; then $(CYGPATH_W) 'libiptc/libip4tc.c'; else $(CYGPATH_W) '$(srcdir)/libiptc/libip4tc.c'; fi`
 
 # This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-#     (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
-	@set fnord $$MAKEFLAGS; amf=$$2; \
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+#     (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(am__recursive_targets):
+	@fail=; \
+	if $(am__make_keepgoing); then \
+	  failcom='fail=yes'; \
+	else \
+	  failcom='exit 1'; \
+	fi; \
 	dot_seen=no; \
 	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	for subdir in $$list; do \
 	  echo "Making $$target in $$subdir"; \
 	  if test "$$subdir" = "."; then \
 	    dot_seen=yes; \
@@ -412,60 +553,20 @@ $(RECURSIVE_TARGETS):
 	  else \
 	    local_target="$$target"; \
 	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
 	done; \
 	if test "$$dot_seen" = "no"; then \
 	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
 	fi; test -z "$$fail"
 
-mostlyclean-recursive clean-recursive distclean-recursive \
-maintainer-clean-recursive:
-	@set fnord $$MAKEFLAGS; amf=$$2; \
-	dot_seen=no; \
-	case "$@" in \
-	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
-	  *) list='$(SUBDIRS)' ;; \
-	esac; \
-	rev=''; for subdir in $$list; do \
-	  if test "$$subdir" = "."; then :; else \
-	    rev="$$subdir $$rev"; \
-	  fi; \
-	done; \
-	rev="$$rev ."; \
-	target=`echo $@ | sed s/-recursive//`; \
-	for subdir in $$rev; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
-	done && test -z "$$fail"
-tags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
-	done
-ctags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
-	done
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-recursive
+TAGS: tags
 
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	tags=; \
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
 	here=`pwd`; \
 	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 	  include_option=--etags-include; \
@@ -477,79 +578,104 @@ TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
 	list='$(SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
 	    test ! -f $$subdir/TAGS || \
-	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 	  fi; \
 	done; \
-	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ctags: ctags-recursive
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-recursive
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 
 distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
-	list='$(DISTFILES)'; for file in $$list; do \
-	  case $$file in \
-	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
-	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
-	  esac; \
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
-	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
-	    dir="/$$dir"; \
-	    $(mkdir_p) "$(distdir)$$dir"; \
-	  else \
-	    dir=''; \
-	  fi; \
 	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
-	list='$(SUBDIRS)'; for subdir in $$list; do \
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
-	    test -d "$(distdir)/$$subdir" \
-	    || mkdir "$(distdir)/$$subdir" \
-	    || exit 1; \
-	    (cd $$subdir && \
+	    $(am__make_dryrun) \
+	      || test -d "$(distdir)/$$subdir" \
+	      || $(MKDIR_P) "$(distdir)/$$subdir" \
+	      || exit 1; \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
 	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="../$(top_distdir)" \
-	        distdir="../$(distdir)/$$subdir" \
+	        top_distdir="$$new_top_distdir" \
+	        distdir="$$new_distdir" \
+		am__remove_distdir=: \
+		am__skip_length_check=: \
+		am__skip_mode_fix=: \
 	        distdir) \
 	      || exit 1; \
 	  fi; \
@@ -560,7 +686,7 @@ all-am: Makefile $(PROGRAMS) config.h
 installdirs: installdirs-recursive
 installdirs-am:
 	for dir in "$(DESTDIR)$(bindir)"; do \
-	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 	done
 install: install-recursive
 install-exec: install-exec-recursive
@@ -572,16 +698,22 @@ install-am: all-am
 
 installcheck: installcheck-recursive
 install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
 mostlyclean-generic:
 
 clean-generic:
 
 distclean-generic:
-	-rm -f $(CONFIG_CLEAN_FILES)
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -602,18 +734,38 @@ dvi-am:
 
 html: html-recursive
 
+html-am:
+
 info: info-recursive
 
 info-am:
 
 install-data-am:
 
+install-dvi: install-dvi-recursive
+
+install-dvi-am:
+
 install-exec-am: install-binPROGRAMS
 
+install-html: install-html-recursive
+
+install-html-am:
+
 install-info: install-info-recursive
 
+install-info-am:
+
 install-man:
 
+install-pdf: install-pdf-recursive
+
+install-pdf-am:
+
+install-ps: install-ps-recursive
+
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-recursive
@@ -633,23 +785,24 @@ ps: ps-recursive
 
 ps-am:
 
-uninstall-am: uninstall-binPROGRAMS uninstall-info-am
-
-uninstall-info: uninstall-info-recursive
-
-.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am \
-	clean clean-binPROGRAMS clean-generic clean-recursive ctags \
-	ctags-recursive distclean distclean-compile distclean-generic \
-	distclean-hdr distclean-recursive distclean-tags distdir dvi \
-	dvi-am html html-am info info-am install install-am \
-	install-binPROGRAMS install-data install-data-am install-exec \
-	install-exec-am install-info install-info-am install-man \
-	install-strip installcheck installcheck-am installdirs \
-	installdirs-am maintainer-clean maintainer-clean-generic \
-	maintainer-clean-recursive mostlyclean mostlyclean-compile \
-	mostlyclean-generic mostlyclean-recursive pdf pdf-am ps ps-am \
-	tags tags-recursive uninstall uninstall-am \
-	uninstall-binPROGRAMS uninstall-info-am
+uninstall-am: uninstall-binPROGRAMS
+
+.MAKE: $(am__recursive_targets) all install-am install-strip
+
+.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
+	check-am clean clean-binPROGRAMS clean-generic cscopelist-am \
+	ctags ctags-am distclean distclean-compile distclean-generic \
+	distclean-hdr distclean-tags distdir dvi dvi-am html html-am \
+	info info-am install install-am install-binPROGRAMS \
+	install-data install-data-am install-dvi install-dvi-am \
+	install-exec install-exec-am install-html install-html-am \
+	install-info install-info-am install-man install-pdf \
+	install-pdf-am install-ps install-ps-am install-strip \
+	installcheck installcheck-am installdirs installdirs-am \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-compile mostlyclean-generic pdf pdf-am ps ps-am \
+	tags tags-am uninstall uninstall-am uninstall-binPROGRAMS
+
 
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.

src/andns_lib.c

@@ -31,7 +31,7 @@ int andns_compress(char *src,int srclen)
 {
 	int res;
 	uLongf space;
-	
+
 	src+=ANDNS_HDR_SZ;
 	srclen-=ANDNS_HDR_SZ;
 	space=compressBound(srclen);
@@ -42,11 +42,11 @@ int andns_compress(char *src,int srclen)
 		 * the uncompressed size */
 	res=compress2(dst+ANDNS_HDR_Z, &space,(u_char *) src, srclen,
 			ANDNS_COMPR_LEVEL);
-	if (res!=Z_OK) 
+	if (res!=Z_OK)
 		err_ret(ERR_ZLIBCP,-1);
-	if (space >= srclen-ANDNS_HDR_Z) /* We have to consider the four 
+	if (space >= srclen-ANDNS_HDR_Z) /* We have to consider the four
 				  		bytes too */
-		err_ret(ERR_ZLIBNU,-1); /* This is a 
+		err_ret(ERR_ZLIBNU,-1); /* This is a
 					silent return */
 	res=htonl(srclen);
 	memcpy(dst,&res,ANDNS_HDR_Z);
@@ -54,7 +54,7 @@ int andns_compress(char *src,int srclen)
 
 	return (int)space;
 }
-char* andns_uncompress(char *src,int srclen,int *dstlen) 
+char* andns_uncompress(char *src,int srclen,int *dstlen)
 {
 	unsigned char *dst;
 	uLongf space;
@@ -64,7 +64,7 @@ char* andns_uncompress(char *src,int srclen,int *dstlen)
 
 	memcpy(&c_len,src+ANDNS_HDR_SZ,ANDNS_HDR_Z);
 	c_len=ntohl(c_len);
-	dst=xmalloc(c_len+ANDNS_HDR_SZ); 
+	dst=xmalloc(c_len+ANDNS_HDR_SZ);
 
 	space=c_len;
 
@@ -79,7 +79,7 @@ char* andns_uncompress(char *src,int srclen,int *dstlen)
 	}
 
 	memcpy(dst, src, ANDNS_HDR_SZ);
-	*dstlen=c_len+ANDNS_HDR_SZ; 
+	*dstlen=c_len+ANDNS_HDR_SZ;
 
 	return (char*)dst;
 }
@@ -104,7 +104,7 @@ int a_hdr_u(char *buf,andns_pkt *ap)
 	ap->id>>=1;
         buf+=2;
 
-        memcpy(&c,buf,2);
+        memcpy(&c,buf,sizeof(uint8_t));
         ap->qr=(c>>7)&0x01;
         ap->p=c&0x40?ANDNS_PROTO_UDP:ANDNS_PROTO_TCP;
 	ap->z=c&0x20;
@@ -150,7 +150,7 @@ int a_qst_u(char *buf,andns_pkt *ap,int limitlen)
 				memcpy(&s,buf,2);
 				ap->qstlength=ntohs(s);
 				buf+=2;
-        			if (ap->qstlength>=ANDNS_MAX_QST_LEN || 
+        			if (ap->qstlength>=ANDNS_MAX_QST_LEN ||
 					ap->qstlength>limitlen-4)
                 			err_ret(ERR_ANDPLB,-1);
 				AP_ALIGN(ap);
@@ -243,7 +243,7 @@ int a_answ_u(char *buf,andns_pkt *ap,int limitlen)
 			memcpy(&alen,buf,2);
 			apd->service=ntohs(alen);
 			buf+=2;
-			if (apd->m&APD_IP) 
+			if (apd->m&APD_IP)
 				apd->rdlength=(ap->ipv?16:4);
 			else
 				apd->rdlength=ANDNS_HASH_H;
@@ -268,7 +268,7 @@ int a_answs_u(char *buf,andns_pkt *ap,int limitlen)
 		memcpy(&alen,buf,sizeof(uint16_t));
 		ap->ancount=ntohs(alen);
 		offset+=2;
-	} 		
+	}
 	ancount=ap->ancount;
         for (i=0;i<ancount;i++) {
                 res=a_answ_u(buf+offset,ap,limitlen-offset);
@@ -303,15 +303,15 @@ int a_u(char *buf,int pktlen,andns_pkt **app)
         *app=ap=create_andns_pkt();
         offset=a_hdr_u(buf,ap);
 
-	if (ap->z) { /* Controls the space to read 
+	if (ap->z) { /* Controls the space to read
 			uncompressed size */
 		if (pktlen<ANDNS_HDR_SZ+ANDNS_HDR_Z) {
 			destroy_andns_pkt(ap);
                 	err_ret(ERR_ANDPLB,0);
 		}
-		if (!(u_buf=andns_uncompress(buf,pktlen,&u_len))) 
+		if (!(u_buf=andns_uncompress(buf,pktlen,&u_len)))
 			goto andmap;
-		destroy_andns_pkt(ap); 
+		destroy_andns_pkt(ap);
 		ANDNS_UNSET_Z(u_buf);
 		res=a_u(u_buf,u_len,app);
 		xfree(u_buf);
@@ -319,14 +319,14 @@ int a_u(char *buf,int pktlen,andns_pkt **app)
 	}
         buf+=offset;
         limitlen=pktlen-offset;
-        if ((res=a_qst_u(buf,ap,limitlen))==-1) 
+        if ((res=a_qst_u(buf,ap,limitlen))==-1)
 		goto andmap;
 	offset+=res;
 	if (!ap->ancount) /*No answers */
 		return offset;
 	buf+=res;
 	limitlen-=res;
-	if ((res=a_answs_u(buf,ap,limitlen))==-1) 
+	if ((res=a_answs_u(buf,ap,limitlen))==-1)
 		goto andmap;
 	offset+=res;
 	if (offset!=pktlen)
@@ -342,13 +342,13 @@ int a_hdr_p(andns_pkt *ap,char *buf)
 {
         uint16_t s;
 	uint8_t an;
-	
+
 	ap->id<<=1;
         s=htons(ap->id);
         memcpy(buf,&s,sizeof(uint16_t));
 	if (ap->r)
 		*(buf+1)|=0x01;
-	else	
+	else
 		*(buf+1)&=0xfe;
         buf+=2;
         if (ap->qr)
@@ -387,7 +387,7 @@ int a_qst_p(andns_pkt *ap,char *buf,int limitlen)
 			} else if (ap->nk==INET_REALM) {
 				s=htons(ap->qstlength);
 				memcpy(buf,&s,2);
-				buf+=2; 
+				buf+=2;
 				memcpy(buf,ap->qstdata,ap->qstlength);
 				ret=ap->qstlength+4;
 			} else
@@ -419,7 +419,7 @@ int a_answ_p(andns_pkt *ap,andns_pkt_data *apd,char *buf,int limitlen)
         uint16_t s;
 	int limit;
 	int ret;
-	
+
 	switch(ap->qtype) {
 		case AT_A:
 			limit=ap->ipv?16:4;
@@ -489,7 +489,7 @@ int a_answs_p(andns_pkt *ap,char *buf, int limitlen)
 		s=htons(ap->ancount);
 		memcpy(buf,&s,2);
 		offset+=2;
-	} 
+	}
         apd=ap->pkt_answ;
         for (i=0;i<ap->ancount && apd;i++) {
                 if((res=a_answ_p(ap,apd,buf+offset,limitlen-offset))==-1) {

src/conf/Makefile.in

@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.8.5 from Makefile.am.
+# Makefile.in generated by automake 1.13.3 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004  Free Software Foundation, Inc.
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -14,15 +14,57 @@
 
 @SET_MAKE@
 
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
 VPATH = @srcdir@
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ../..
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
 install_sh_SCRIPT = $(install_sh) -c
@@ -34,27 +76,72 @@ POST_INSTALL = :
 NORMAL_UNINSTALL = :
 PRE_UNINSTALL = :
 POST_UNINSTALL = :
+build_triplet = @build@
 host_triplet = @host@
 subdir = src/conf
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
 	$(srcdir)/netsukuku.conf.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
-mkinstalldirs = $(mkdir_p)
+mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/src/config.h
 CONFIG_CLEAN_FILES = netsukuku.conf
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
 SOURCES =
 DIST_SOURCES =
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
 am__installdirs = "$(DESTDIR)$(sysconfdir)"
-sysconfDATA_INSTALL = $(INSTALL_DATA)
 DATA = $(sysconf_DATA)
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
 AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 AUTOCONF = @AUTOCONF@
 AUTOHEADER = @AUTOHEADER@
 AUTOMAKE = @AUTOMAKE@
@@ -77,7 +164,9 @@ ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
+GREP = @GREP@
 IF_METHOD = @IF_METHOD@
+INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
@@ -88,6 +177,7 @@ LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
 LTLIBOBJS = @LTLIBOBJS@
 MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
 OBJEXT = @OBJEXT@
 OTHER_METHOD = @OTHER_METHOD@
 PACKAGE = @PACKAGE@
@@ -95,6 +185,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PID_DIR = @PID_DIR@
@@ -103,24 +194,29 @@ SET_MAKE = @SET_MAKE@
 SHELL = @SHELL@
 STRIP = @STRIP@
 VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
-ac_ct_STRIP = @ac_ct_STRIP@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
 am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
 bindir = @bindir@
 build = @build@
 build_alias = @build_alias@
 build_cpu = @build_cpu@
 build_os = @build_os@
 build_vendor = @build_vendor@
+builddir = @builddir@
 datadir = @datadir@
+datarootdir = @datarootdir@
 debug_flags = @debug_flags@
+docdir = @docdir@
+dvidir = @dvidir@
 exec_prefix = @exec_prefix@
 gmp = @gmp@
 host = @host@
@@ -128,21 +224,29 @@ host_alias = @host_alias@
 host_cpu = @host_cpu@
 host_os = @host_os@
 host_vendor = @host_vendor@
+htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
 libdir = @libdir@
 libexecdir = @libexecdir@
+localedir = @localedir@
 localstatedir = @localstatedir@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
+psdir = @psdir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
 sysconfdir = @sysconfdir@
 target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
 sysconf_DATA = netsukuku.conf andna_hostnames snsd_nodes
 all: all-am
 
@@ -151,14 +255,14 @@ $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
 	    *$$dep*) \
-	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
-		&& exit 0; \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  src/conf/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --gnu  src/conf/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu src/conf/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu src/conf/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -176,57 +280,64 @@ $(top_srcdir)/configure:  $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 netsukuku.conf: $(top_builddir)/config.status $(srcdir)/netsukuku.conf.in
 	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
-uninstall-info-am:
 install-sysconfDATA: $(sysconf_DATA)
 	@$(NORMAL_INSTALL)
-	test -z "$(sysconfdir)" || $(mkdir_p) "$(DESTDIR)$(sysconfdir)"
-	@list='$(sysconf_DATA)'; for p in $$list; do \
+	@list='$(sysconf_DATA)'; test -n "$(sysconfdir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(sysconfdir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(sysconfdir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f="`echo $$p | sed -e 's|^.*/||'`"; \
-	  echo " $(sysconfDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(sysconfdir)/$$f'"; \
-	  $(sysconfDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(sysconfdir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(sysconfdir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(sysconfdir)" || exit $$?; \
 	done
 
 uninstall-sysconfDATA:
 	@$(NORMAL_UNINSTALL)
-	@list='$(sysconf_DATA)'; for p in $$list; do \
-	  f="`echo $$p | sed -e 's|^.*/||'`"; \
-	  echo " rm -f '$(DESTDIR)$(sysconfdir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(sysconfdir)/$$f"; \
-	done
-tags: TAGS
-TAGS:
+	@list='$(sysconf_DATA)'; test -n "$(sysconfdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	dir='$(DESTDIR)$(sysconfdir)'; $(am__uninstall_files_from_dir)
+tags TAGS:
+
+ctags CTAGS:
 
-ctags: CTAGS
-CTAGS:
+cscope cscopelist:
 
 
 distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
-	list='$(DISTFILES)'; for file in $$list; do \
-	  case $$file in \
-	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
-	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
-	  esac; \
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
-	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
-	    dir="/$$dir"; \
-	    $(mkdir_p) "$(distdir)$$dir"; \
-	  else \
-	    dir=''; \
-	  fi; \
 	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -235,7 +346,7 @@ check: check-am
 all-am: Makefile $(DATA)
 installdirs:
 	for dir in "$(DESTDIR)$(sysconfdir)"; do \
-	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 	done
 install: install-am
 install-exec: install-exec-am
@@ -247,16 +358,22 @@ install-am: all-am
 
 installcheck: installcheck-am
 install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
 mostlyclean-generic:
 
 clean-generic:
 
 distclean-generic:
-	-rm -f $(CONFIG_CLEAN_FILES)
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -275,18 +392,38 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
 
 install-data-am:
 
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
 install-exec-am: install-sysconfDATA
 
+install-html: install-html-am
+
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -305,16 +442,22 @@ ps: ps-am
 
 ps-am:
 
-uninstall-am: uninstall-info-am uninstall-sysconfDATA
+uninstall-am: uninstall-sysconfDATA
+
+.MAKE: install-am install-strip
+
+.PHONY: all all-am check check-am clean clean-generic cscopelist-am \
+	ctags-am distclean distclean-generic distdir dvi dvi-am html \
+	html-am info info-am install install-am install-data \
+	install-data-am install-dvi install-dvi-am install-exec \
+	install-exec-am install-html install-html-am install-info \
+	install-info-am install-man install-pdf install-pdf-am \
+	install-ps install-ps-am install-strip install-sysconfDATA \
+	installcheck installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
+	pdf-am ps ps-am tags-am uninstall uninstall-am \
+	uninstall-sysconfDATA
 
-.PHONY: all all-am check check-am clean clean-generic distclean \
-	distclean-generic distdir dvi dvi-am html html-am info info-am \
-	install install-am install-data install-data-am install-exec \
-	install-exec-am install-info install-info-am install-man \
-	install-strip install-sysconfDATA installcheck installcheck-am \
-	installdirs maintainer-clean maintainer-clean-generic \
-	mostlyclean mostlyclean-generic pdf pdf-am ps ps-am uninstall \
-	uninstall-am uninstall-info-am uninstall-sysconfDATA
 
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.

src/config.h.in

@@ -90,6 +90,9 @@
 /* Define to the one symbol short name of this package. */
 #undef PACKAGE_TARNAME
 
+/* Define to the home page for this package. */
+#undef PACKAGE_URL
+
 /* Define to the version of this package. */
 #undef PACKAGE_VERSION
 

src/inet.c

@@ -2,7 +2,7 @@
  * (c) Copyright 2005 Andrea Lo Pumo aka AlpT <alpt@freaknet.org>
  *
  * This source code is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as published 
+ * modify it under the terms of the GNU General Public License as published
  * by the Free Software Foundation; either version 2 of the License,
  * or (at your option) any later version.
  *
@@ -26,7 +26,7 @@
 #include "endianness.h"
 
 
-/* 
+/*
  * inet_ntohl: Converts each element of `data' from network to host order. If
  * `family' is equal to AF_INET6, the array is swapped too (on big endian
  * machine).
@@ -45,7 +45,7 @@ void inet_ntohl(u_int *data, int family)
 #endif
 }
 
-/* 
+/*
  * inet_htonl: Converts each element of `data' from host to network order. If
  * `family' is equal to AF_INET6, the array is swapped too (on big endian
  * machine).
@@ -71,18 +71,18 @@ int inet_setip_raw(inet_prefix *ip, u_int *data, int family)
 {
 	ip->family=family;
 	setzero(ip->data, sizeof(ip->data));
-	
+
 	if(family==AF_INET) {
 		ip->data[0]=data[0];
 		ip->len=4;
 	} else if(family==AF_INET6) {
 		memcpy(ip->data, data, sizeof(ip->data));
 		ip->len=16;
-	} else 
+	} else
 		fatal(ERROR_MSG "family not supported", ERROR_POS);
 
 	ip->bits=ip->len<<3; /* bits=len*8 */
-	
+
 	return 0;
 }
 
@@ -107,7 +107,7 @@ int inet_setip_bcast(inet_prefix *ip, int family)
 	} else if(family==AF_INET6) {
 		u_int data[MAX_IP_INT]=IPV6_ADDR_BROADCAST;
 		inet_setip(ip, data, family);
-	} else 
+	} else
 		fatal(ERROR_MSG "family not supported", ERROR_POS);
 
 	return 0;
@@ -117,13 +117,13 @@ int inet_setip_anyaddr(inet_prefix *ip, int family)
 {
 	if(family==AF_INET) {
 		u_int data[MAX_IP_INT]={0, 0, 0, 0};
-		
+
 		data[0]=INADDR_ANY;
 		inet_setip(ip, data, family);
 	} else if(family==AF_INET6) {
 		struct in6_addr ipv6=IN6ADDR_ANY_INIT;
 		inet_setip(ip, (u_int *)(&ipv6), family);
-	} else 
+	} else
 		fatal(ERROR_MSG "family not supported", ERROR_POS);
 
 	return 0;
@@ -133,22 +133,22 @@ int inet_setip_loopback(inet_prefix *ip, int family)
 {
 	if(family==AF_INET) {
 		u_int data[MAX_IP_INT]={0, 0, 0, 0};
-		
+
 		data[0]=LOOPBACK_IP;
 		inet_setip(ip, data, family);
 		inet_htonl(ip->data, ip->family);
 	} else if(family==AF_INET6) {
 		u_int data[MAX_IP_INT]=LOOPBACK_IPV6;
 		inet_setip(ip, data, family);
-	} else 
+	} else
 		fatal(ERROR_MSG "family not supported", ERROR_POS);
 
 	return 0;
 }
 
-/* 
+/*
  * inet_setip_localaddr: Restrict the `ip' to a local private class changing the
- * first byte of the `ip'. `class' specifies what restricted class is currently 
+ * first byte of the `ip'. `class' specifies what restricted class is currently
  * being used (10.x.x.x or 172.16.x.x). In ipv6 the site local class is the
  * default.
  */
@@ -157,11 +157,11 @@ int inet_setip_localaddr(inet_prefix *ip, int family, int class)
 	if(family==AF_INET) {
 		if(class == RESTRICTED_10)
 			ip->data[0] = NTK_RESTRICTED_10_MASK(ip->data[0]);
-		else 
+		else
 			ip->data[0] = NTK_RESTRICTED_172_MASK(ip->data[0]);
 	} else if(family==AF_INET6) {
 		ip->data[0] = NTK_RESTRICTED_IPV6_MASK(ip->data[0]);
-	} else 
+	} else
 		fatal(ERROR_MSG "family not supported", ERROR_POS);
 
 	return 0;
@@ -169,7 +169,7 @@ int inet_setip_localaddr(inet_prefix *ip, int family, int class)
 
 /*
  * inet_is_ip_local: verifies if `ip' is a local address. If it is, 1 is
- * returned. `class' specifies what restricted class is currently 
+ * returned. `class' specifies what restricted class is currently
  * being used (10.x.x.x or 172.16.x.x). In ipv6 the site local class is the
  * default.
  */
@@ -236,7 +236,7 @@ void pack_inet_prefix(inet_prefix *ip, char *pack)
 	memcpy(buf, ip->data, MAX_IP_SZ);
 	inet_htonl((u_int *)buf, ip->family);
 	buf+=MAX_IP_SZ;
-	
+
 	ints_host_to_network(pack, inet_prefix_iinfo);
 }
 
@@ -249,7 +249,7 @@ void unpack_inet_prefix(inet_prefix *ip, char *pack)
 	char *buf;
 
 	buf=pack;
-	
+
 	ints_network_to_host(pack, inet_prefix_iinfo);
 
 	memcpy(&ip->family, buf, sizeof(u_char));
@@ -266,18 +266,18 @@ void unpack_inet_prefix(inet_prefix *ip, char *pack)
 	buf+=MAX_IP_SZ;
 }
 
-/* 
+/*
  * inet_addr_match: without hesitating this function was robbed from iproute2.
  * It compares a->data wih b->data matching `bits'# bits.
  */
 int inet_addr_match(const inet_prefix *a, const inet_prefix *b, int bits)
 {
-        uint32_t *a1 = a->data;
-        uint32_t *a2 = b->data;
+        const uint32_t *a1 = a->data;
+        const uint32_t *a2 = b->data;
         int words = bits >> 0x05;
-        
+
         bits &= 0x1f;
-        
+
         if (words)
                 if (memcmp(a1, a2, words << 2))
                         return -1;
@@ -332,7 +332,7 @@ int ipv6_addr_type(inet_prefix addr)
 	if ((st & htonl(0xE0000000)) != htonl(0x00000000) &&
 	    (st & htonl(0xE0000000)) != htonl(0xE0000000))
 		return type;
-	
+
 	if ((st & htonl(0xFFC00000)) == htonl(0xFE800000))
 		return (IPV6_ADDR_LINKLOCAL | type);
 
@@ -375,14 +375,14 @@ int inet_validate_ip(inet_prefix ip)
 
 	if(ip.family==AF_INET) {
 		ipv4=htonl(ip.data[0]);
-		if(MULTICAST(ipv4) || BADCLASS(ipv4) || ZERONET(ipv4) 
+		if(MULTICAST(ipv4) || BADCLASS(ipv4) || ZERONET(ipv4)
 			|| LOOPBACK(ipv4) || NTK_PRIVATE_C(ipv4) ||
 			(!restricted_mode && NTK_PRIVATE_B(ipv4)))
 			return -EINVAL;
 
 	} else if(ip.family==AF_INET6) {
 		type=ipv6_addr_type(ip);
-		if( (type & IPV6_ADDR_MULTICAST) || (type & IPV6_ADDR_RESERVED) || 
+		if( (type & IPV6_ADDR_MULTICAST) || (type & IPV6_ADDR_RESERVED) ||
 				(type & IPV6_ADDR_LOOPBACK))
 			return -EINVAL;
 	}
@@ -396,8 +396,8 @@ int inet_validate_ip(inet_prefix ip)
 
 /*\
  *
- *  *  *  Conversion functions...  *  * 
- * 
+ *  *  *  Conversion functions...  *  *
+ *
 \*/
 
 /*
@@ -413,7 +413,7 @@ const char *ipraw_to_str(u_int ip[MAX_IP_INT], int family)
 	if(family==AF_INET) {
 		src.s_addr=htonl(ip[0]);
 		inet_ntop(family, &src, dst, INET_ADDRSTRLEN);
-		
+
 		return dst;
 	} else if(family==AF_INET6) {
 		inet_htonl(ip, family);
@@ -457,7 +457,7 @@ int str_to_inet(const char *src, inet_prefix *ip)
 	}
 
 	if((res=inet_pton(family, src, (void *)data)) < 0) {
-		debug(DBG_NORMAL, ERROR_MSG "error -> %s.", 
+		debug(DBG_NORMAL, ERROR_MSG "error -> %s.",
 				ERROR_FUNC, strerror(errno));
 		return -1;
 	}
@@ -478,27 +478,27 @@ int inet_to_sockaddr(inet_prefix *ip, u_short port, struct sockaddr *dst,
 		socklen_t *dstlen)
 {
 	port=htons(port);
-	
+
 	if(ip->family==AF_INET) {
 		struct sockaddr_in sin;
 		setzero(&sin,  sizeof(struct sockaddr_in));
-		
+
 		sin.sin_family = ip->family;
 		sin.sin_port = port;
 		sin.sin_addr.s_addr = htonl(ip->data[0]);
 		memcpy(dst, &sin, sizeof(struct sockaddr_in));
-		
+
 		if(dstlen)
 			*dstlen=sizeof(struct sockaddr_in);
 
 	} else if(ip->family==AF_INET6) {
 		struct sockaddr_in6 sin6;
 		setzero(&sin6,  sizeof(struct sockaddr_in6));
-		
+
 		sin6.sin6_family = ip->family;
 		sin6.sin6_port = port;
 		sin6.sin6_flowinfo = 0;
-		
+
 		memcpy(&sin6.sin6_addr, ip->data, MAX_IP_SZ);
 		inet_htonl((u_int *)&sin6.sin6_addr, ip->family);
 
@@ -516,14 +516,14 @@ int sockaddr_to_inet(struct sockaddr *ip, inet_prefix *dst, u_short *port)
 {
 	u_short po;
 	char *p;
-	
+
 	setzero(dst,  sizeof(inet_prefix));
-	
+
 	dst->family=ip->sa_family;
 	memcpy(&po, &ip->sa_data, sizeof(u_short));
 	if(port)
 		*port=ntohs(po);
-	
+
 	if(ip->sa_family==AF_INET)
 		p=(char *)ip->sa_data+sizeof(u_short);
 	else if(ip->sa_family==AF_INET6)
@@ -532,7 +532,7 @@ int sockaddr_to_inet(struct sockaddr *ip, inet_prefix *dst, u_short *port)
 		error(ERROR_MSG "family not supported", ERROR_POS);
 		return -1;
 	}
-		
+
 	inet_setip(dst, (u_int *)p, ip->sa_family);
 
 	return 0;
@@ -566,7 +566,7 @@ int new_dgram_socket(int sock_type)
 	return sockfd;
 }
 
-/* 
+/*
  * inet_close
  *
  * It closes the `*sk' socket and sets it to zero.
@@ -594,20 +594,20 @@ int inet_getpeername(int sk, inet_prefix *ip, short *port)
 	return sockaddr_to_inet(sa, ip, port);
 }
 
-/* 
+/*
  * join_ipv6_multicast: It adds the membership to the IPV6_ADDR_BROADCAST
- * multicast group. The device with index `idx' will be used. 
+ * multicast group. The device with index `idx' will be used.
  */
 int join_ipv6_multicast(int socket, int idx)
 {
 	struct ipv6_mreq    mreq6;
 	const int addr[MAX_IP_INT]=IPV6_ADDR_BROADCAST;
-	
+
 	setzero(&mreq6, sizeof(struct ipv6_mreq));
 	memcpy(&mreq6.ipv6mr_multiaddr,	addr, sizeof(struct in6_addr));
 	mreq6.ipv6mr_interface=idx;
-	
-	if(setsockopt(socket, IPPROTO_IPV6, IPV6_JOIN_GROUP, &mreq6, 
+
+	if(setsockopt(socket, IPPROTO_IPV6, IPV6_JOIN_GROUP, &mreq6,
 				sizeof(mreq6)) < 0) {
 		error("Cannot set IPV6_JOIN_GROUP: %s", strerror(errno));
 	        close(socket);
@@ -631,11 +631,11 @@ int set_multicast_if(int socket, int idx)
 
 	return 0;
 }
-		
+
 int set_nonblock_sk(int fd)
 {
 	if (fcntl(fd, F_SETFL, O_NONBLOCK) < 0) {
-		error("set_nonblock_sk(): cannot set O_NONBLOCK: %s", 
+		error("set_nonblock_sk(): cannot set O_NONBLOCK: %s",
 				strerror(errno));
 		close(fd);
 		return -1;
@@ -646,7 +646,7 @@ int set_nonblock_sk(int fd)
 int unset_nonblock_sk(int fd)
 {
 	if (fcntl(fd, F_SETFL, 0) < 0) {
-		error("unset_nonblock_sk(): cannot unset O_NONBLOCK: %s", 
+		error("unset_nonblock_sk(): cannot unset O_NONBLOCK: %s",
 				strerror(errno));
 		close(fd);
 		return -1;
@@ -671,10 +671,10 @@ int set_bindtodevice_sk(int socket, char *dev)
 {
 	struct ifreq ifr;
 	int ret=0;
-	
+
 	setzero(&ifr, sizeof(ifr));
 	strncpy(ifr.ifr_name, dev, IFNAMSIZ-1);
-	
+
 	ret=setsockopt(socket, SOL_SOCKET, SO_BINDTODEVICE, dev, strlen(dev)+1);
 	if(ret < 0)
 		error("setsockopt SO_BINDTODEVICE: %s", strerror(errno));
@@ -683,7 +683,7 @@ int set_bindtodevice_sk(int socket, char *dev)
 }
 
 /*
- * `loop': 0 = disable, 1 = enable (default) 
+ * `loop': 0 = disable, 1 = enable (default)
  */
 int set_multicast_loop_sk(int family, int socket, u_char loop)
 {
@@ -707,7 +707,7 @@ int set_broadcast_sk(int socket, int family, inet_prefix *host, short port,
 	struct sockaddr	*sa=(struct sockaddr *)&saddr_sto;
 	socklen_t alen;
 	int broadcast=1;
-	
+
 	if(family == AF_INET) {
 		if (setsockopt(socket, SOL_SOCKET, SO_BROADCAST, &broadcast,
 					sizeof(broadcast)) < 0) {
@@ -723,7 +723,7 @@ int set_broadcast_sk(int socket, int family, inet_prefix *host, short port,
 		set_multicast_if(socket, dev_idx);
 	} else
 		fatal(ERROR_MSG "family not supported", ERROR_POS);
-	
+
 	/* What's my name ? */
 	alen = sizeof(saddr_sto);
 	setzero(sa, alen);
@@ -732,14 +732,14 @@ int set_broadcast_sk(int socket, int family, inet_prefix *host, short port,
 		close(socket);
 		return -1;
 	}
-	
+
 	/* Let's bind it! */
 	if(bind(socket, sa, alen) < 0) {
 		error("Cannot bind the broadcast socket: %s", strerror(errno));
 		close(socket);
 		return -1;
 	}
-	
+
 	return socket;
 }
 
@@ -759,7 +759,7 @@ int set_keepalive_sk(int socket)
 {
 	int on=1;
 
-	if(setsockopt(socket, SOL_SOCKET, SO_KEEPALIVE, (void *)&on, 
+	if(setsockopt(socket, SOL_SOCKET, SO_KEEPALIVE, (void *)&on,
 				sizeof(on)) < 0){
 		error("Cannot set keepalive socket: %s", strerror(errno));
 		return -1;
@@ -771,7 +771,7 @@ int unset_keepalive_sk(int socket)
 {
 	int off=0;
 
-	if(setsockopt(socket, SOL_SOCKET, SO_KEEPALIVE, (void *)&off, 
+	if(setsockopt(socket, SOL_SOCKET, SO_KEEPALIVE, (void *)&off,
 				sizeof(off)) < 0){
 		error("Cannot unset keepalive socket: %s", strerror(errno));
 		return -1;
@@ -794,7 +794,7 @@ int set_tos_sk(int socket, int lowdelay)
 
 /*\
  *
- *   *  *  Connection functions  *  * 
+ *   *  *  Connection functions  *  *
  *
 \*/
 
@@ -806,19 +806,19 @@ int new_tcp_conn(inet_prefix *host, short port, char *dev)
 	struct sockaddr	*sa=(struct sockaddr *)&saddr_sto;
 	const char *ntop;
 	ntop=inet_to_str(*host);
-	
+
 	if(inet_to_sockaddr(host, port, sa, &sa_len)) {
 		error("Cannot new_tcp_connect(): %d Family not supported", host->family);
 		ERROR_FINISH(sk, -1, finish);
 	}
-	
+
 	if((sk = new_socket(host->family)) == -1)
 		ERROR_FINISH(sk, -1, finish);
 
 	if(dev) /* if `dev' is not null bind the socket to it */
 		if(set_bindtodevice_sk(sk, dev) < 0)
 			ERROR_FINISH(sk, -1, finish);
-	
+
 	if (connect(sk, sa, sa_len) == -1) {
 		error("Cannot tcp_connect() to %s: %s", ntop, strerror(errno));
 		ERROR_FINISH(sk, -1, finish);
@@ -828,7 +828,7 @@ finish:
 }
 
 int new_udp_conn(inet_prefix *host, short port, char *dev)
-{	
+{
 	int sk;
 	socklen_t sa_len;
 	struct sockaddr_storage saddr_sto;
@@ -841,9 +841,9 @@ int new_udp_conn(inet_prefix *host, short port, char *dev)
 		ERROR_FINISH(sk, -1, finish);
 	}
 
-	if((sk = new_dgram_socket(host->family)) == -1) 
+	if((sk = new_dgram_socket(host->family)) == -1)
 		ERROR_FINISH(sk, -1, finish);
-	
+
 	if(dev) /* if `dev' is not null bind the socket to it */
 		if(set_bindtodevice_sk(sk, dev) < 0)
 			ERROR_FINISH(sk, -1, finish);
@@ -852,13 +852,13 @@ int new_udp_conn(inet_prefix *host, short port, char *dev)
 		error("Cannot connect to %s: %s", ntop, strerror(errno));
 		ERROR_FINISH(sk, -1, finish);
 	}
-	
+
 finish:
 	return sk;
 }
-	
+
 int new_bcast_conn(inet_prefix *host, short port, int dev_idx)
-{	
+{
 	struct sockaddr_storage saddr_sto;
 	struct sockaddr	*sa=(struct sockaddr *)&saddr_sto;
 	socklen_t alen;
@@ -868,26 +868,26 @@ int new_bcast_conn(inet_prefix *host, short port, int dev_idx)
 	if((sk = new_dgram_socket(host->family)) == -1)
 		return -1;
 	sk=set_broadcast_sk(sk, host->family, host, port, dev_idx);
-	
+
 	/*
-	 * Connect 
+	 * Connect
 	 */
 	if(inet_to_sockaddr(host, port, sa, &alen)) {
 		error("set_broadcast_sk: %d Family not supported", host->family);
 		return -1;
 	}
-	
+
 	if(host->family == AF_INET6) {
 		struct sockaddr_in6 *sin6=(struct sockaddr_in6 *)sa;
 		sin6->sin6_scope_id = dev_idx;
 	}
-	
+
 	if(set_bindtodevice_sk(sk, (char *)ll_index_to_name(dev_idx)) < 0)
 		return -1;
-	
+
 	if(connect(sk, sa, alen) == -1) {
 		ntop=inet_to_str(*host);
-		error("Cannot connect to the broadcast (%s): %s", ntop,	
+		error("Cannot connect to the broadcast (%s): %s", ntop,
 				strerror(errno));
 		return -1;
 	}
@@ -909,7 +909,7 @@ ssize_t inet_recv(int s, void *buf, size_t len, int flags)
 	int ret;
 
 	if((err=recv(s, buf, len, flags))==-1) {
-		switch(errno) 
+		switch(errno)
 		{
 			default:
 				/* Probably connection was closed */
@@ -922,9 +922,9 @@ ssize_t inet_recv(int s, void *buf, size_t len, int flags)
 	return err;
 }
 
-/* 
+/*
  * inet_recv_timeout
- * 
+ *
  * is the same as inet_recv() but if no reply is received for `timeout'
  * seconds it returns -1.
  */
@@ -955,7 +955,7 @@ ssize_t inet_recvfrom(int s, void *buf, size_t len, int flags, struct sockaddr *
 	int ret;
 
 	if((err=recvfrom(s, buf, len, flags, from, fromlen)) < 0) {
-		switch(errno) 
+		switch(errno)
 		{
 			default:
 				error("inet_recvfrom: Cannot recv(): %s", strerror(errno));
@@ -966,11 +966,11 @@ ssize_t inet_recvfrom(int s, void *buf, size_t len, int flags, struct sockaddr *
 	return err;
 }
 
-/* 
+/*
  * inet_recvfrom_timeout: is the same as inet_recvfrom() but if no reply is
  * received for `timeout' seconds it returns -1.
  */
-ssize_t inet_recvfrom_timeout(int s, void *buf, size_t len, int flags, 
+ssize_t inet_recvfrom_timeout(int s, void *buf, size_t len, int flags,
 		struct sockaddr *from, socklen_t *fromlen, u_int timeout)
 {
 	struct timeval timeout_t;
@@ -990,10 +990,10 @@ ssize_t inet_recvfrom_timeout(int s, void *buf, size_t len, int flags,
 
 	if(FD_ISSET(s, &fdset))
 		return inet_recvfrom(s, buf, len, flags, from, fromlen);
-	
+
 	return -1;
 }
-			
+
 ssize_t inet_send(int s, const void *msg, size_t len, int flags)
 {
 	ssize_t err;
@@ -1001,11 +1001,11 @@ ssize_t inet_send(int s, const void *msg, size_t len, int flags)
 	int ret;
 
 	if((err=send(s, msg, len, flags)) < 0) {
-		switch(errno) 
+		switch(errno)
 		{
 			case EMSGSIZE:
 				inet_send(s, msg, len/2, flags);
-				err=inet_send(s, (const char *)msg+(len/2), 
+				err=inet_send(s, (const char *)msg+(len/2),
 						len-(len/2), flags);
 				break;
 
@@ -1029,7 +1029,7 @@ ssize_t inet_send_timeout(int s, const void *msg, size_t len, int flags, u_int t
 	int ret;
 
 	MILLISEC_TO_TV(timeout*1000, timeout_t);
-	
+
 	FD_ZERO(&fdset);
 	FD_SET(s, &fdset);
 
@@ -1047,14 +1047,14 @@ ssize_t inet_send_timeout(int s, const void *msg, size_t len, int flags, u_int t
 
 
 
-ssize_t inet_sendto(int s, const void *msg, size_t len, int flags, 
+ssize_t inet_sendto(int s, const void *msg, size_t len, int flags,
 		const struct sockaddr *to, socklen_t tolen)
 {
 	ssize_t err;
 	fd_set fdset;
 	int ret;
 	int errno_int;
-	
+
 	if((err=sendto(s, msg, len, flags, to, tolen))==-1) {
 		errno_int = errno;
 		error("sendto errno: %d err is: %d", errno, err);
@@ -1063,7 +1063,7 @@ ssize_t inet_sendto(int s, const void *msg, size_t len, int flags,
 			case EMSGSIZE:
 			error("Packet artificially fragmented: %d", stderr);
 				inet_sendto(s, msg, len/2, flags, to, tolen);
-				err=inet_sendto(s, ((const char *)msg+(len/2)), 
+				err=inet_sendto(s, ((const char *)msg+(len/2)),
 						len-(len/2), flags, to, tolen);
 				break;
 			case EFAULT:
@@ -1081,7 +1081,7 @@ ssize_t inet_sendto(int s, const void *msg, size_t len, int flags,
  * inet_sendto_timeout: is the same as inet_sendto() but if the packet isn't sent
  * in `timeout' seconds it timeouts and returns -1.
  */
-ssize_t inet_sendto_timeout(int s, const void *msg, size_t len, int flags, 
+ssize_t inet_sendto_timeout(int s, const void *msg, size_t len, int flags,
 		const struct sockaddr *to, socklen_t tolen, u_int timeout)
 {
 	struct timeval timeout_t;
@@ -1089,7 +1089,7 @@ ssize_t inet_sendto_timeout(int s, const void *msg, size_t len, int flags,
 	int ret;
 
 	MILLISEC_TO_TV(timeout*1000, timeout_t);
-	
+
 	FD_ZERO(&fdset);
 	FD_SET(s, &fdset);
 

src/libiptc/libiptc.c

@@ -509,6 +509,7 @@ new_rule:
 			t = (STRUCT_STANDARD_TARGET *)GET_TARGET(e);
 			if (t->target.u.target_size
 			    != ALIGN(sizeof(STRUCT_STANDARD_TARGET))) {
+				free(r);
 				errno = EINVAL;
 				return -1;
 			}
@@ -2120,6 +2121,7 @@ TC_COMMIT(TC_HANDLE_T *handle)
 		errno = ret;
 		free(repl->counters);
 		free(repl);
+		free(newcounters);
 		return 0;
 	}
 

src/man/Makefile.in

@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.8.5 from Makefile.am.
+# Makefile.in generated by automake 1.13.3 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004  Free Software Foundation, Inc.
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -13,15 +13,57 @@
 # PARTICULAR PURPOSE.
 
 @SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
 VPATH = @srcdir@
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ../..
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
 install_sh_SCRIPT = $(install_sh) -c
@@ -33,28 +75,74 @@ POST_INSTALL = :
 NORMAL_UNINSTALL = :
 PRE_UNINSTALL = :
 POST_UNINSTALL = :
+build_triplet = @build@
 host_triplet = @host@
 subdir = src/man
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
-mkinstalldirs = $(mkdir_p)
+mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/src/config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
 SOURCES =
 DIST_SOURCES =
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
 man5dir = $(mandir)/man5
 am__installdirs = "$(DESTDIR)$(man5dir)" "$(DESTDIR)$(man8dir)"
 man8dir = $(mandir)/man8
 NROFF = nroff
 MANS = $(man5_MANS) $(man8_MANS)
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
 AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 AUTOCONF = @AUTOCONF@
 AUTOHEADER = @AUTOHEADER@
 AUTOMAKE = @AUTOMAKE@
@@ -77,7 +165,9 @@ ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
+GREP = @GREP@
 IF_METHOD = @IF_METHOD@
+INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
@@ -88,6 +178,7 @@ LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
 LTLIBOBJS = @LTLIBOBJS@
 MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
 OBJEXT = @OBJEXT@
 OTHER_METHOD = @OTHER_METHOD@
 PACKAGE = @PACKAGE@
@@ -95,6 +186,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PID_DIR = @PID_DIR@
@@ -103,24 +195,29 @@ SET_MAKE = @SET_MAKE@
 SHELL = @SHELL@
 STRIP = @STRIP@
 VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
-ac_ct_STRIP = @ac_ct_STRIP@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
 am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
 bindir = @bindir@
 build = @build@
 build_alias = @build_alias@
 build_cpu = @build_cpu@
 build_os = @build_os@
 build_vendor = @build_vendor@
+builddir = @builddir@
 datadir = @datadir@
+datarootdir = @datarootdir@
 debug_flags = @debug_flags@
+docdir = @docdir@
+dvidir = @dvidir@
 exec_prefix = @exec_prefix@
 gmp = @gmp@
 host = @host@
@@ -128,21 +225,29 @@ host_alias = @host_alias@
 host_cpu = @host_cpu@
 host_os = @host_os@
 host_vendor = @host_vendor@
+htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
 libdir = @libdir@
 libexecdir = @libexecdir@
+localedir = @localedir@
 localstatedir = @localstatedir@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
+psdir = @psdir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
 sysconfdir = @sysconfdir@
 target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
 man8_MANS = andna.8 ntkd.8 ntk-wifi.8 ntk-resolv.8 netsukuku.conf.5
 man5_MANS = netsukuku.conf.5
 all: all-am
@@ -152,14 +257,14 @@ $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
 	    *$$dep*) \
-	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
-		&& exit 0; \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  src/man/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --gnu  src/man/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu src/man/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu src/man/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -177,128 +282,123 @@ $(top_srcdir)/configure:  $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-uninstall-info-am:
-install-man5: $(man5_MANS) $(man_MANS)
+$(am__aclocal_m4_deps):
+install-man5: $(man5_MANS)
 	@$(NORMAL_INSTALL)
-	test -z "$(man5dir)" || $(mkdir_p) "$(DESTDIR)$(man5dir)"
-	@list='$(man5_MANS) $(dist_man5_MANS) $(nodist_man5_MANS)'; \
-	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
-	for i in $$l2; do \
-	  case "$$i" in \
-	    *.5*) list="$$list $$i" ;; \
-	  esac; \
+	@list1='$(man5_MANS)'; \
+	list2=''; \
+	test -n "$(man5dir)" \
+	  && test -n "`echo $$list1$$list2`" \
+	  || exit 0; \
+	echo " $(MKDIR_P) '$(DESTDIR)$(man5dir)'"; \
+	$(MKDIR_P) "$(DESTDIR)$(man5dir)" || exit 1; \
+	{ for i in $$list1; do echo "$$i"; done;  \
+	if test -n "$$list2"; then \
+	  for i in $$list2; do echo "$$i"; done \
+	    | sed -n '/\.5[a-z]*$$/p'; \
+	fi; \
+	} | while read p; do \
+	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; echo "$$p"; \
+	done | \
+	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+	sed 'N;N;s,\n, ,g' | { \
+	list=; while read file base inst; do \
+	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man5dir)/$$inst'"; \
+	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man5dir)/$$inst" || exit $$?; \
+	  fi; \
 	done; \
-	for i in $$list; do \
-	  if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
-	  else file=$$i; fi; \
-	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
-	  case "$$ext" in \
-	    5*) ;; \
-	    *) ext='5' ;; \
-	  esac; \
-	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
-	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
-	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
-	  echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man5dir)/$$inst'"; \
-	  $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man5dir)/$$inst"; \
-	done
+	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+	while read files; do \
+	  test -z "$$files" || { \
+	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man5dir)'"; \
+	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man5dir)" || exit $$?; }; \
+	done; }
+
 uninstall-man5:
 	@$(NORMAL_UNINSTALL)
-	@list='$(man5_MANS) $(dist_man5_MANS) $(nodist_man5_MANS)'; \
-	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
-	for i in $$l2; do \
-	  case "$$i" in \
-	    *.5*) list="$$list $$i" ;; \
-	  esac; \
-	done; \
-	for i in $$list; do \
-	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
-	  case "$$ext" in \
-	    5*) ;; \
-	    *) ext='5' ;; \
-	  esac; \
-	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
-	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
-	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
-	  echo " rm -f '$(DESTDIR)$(man5dir)/$$inst'"; \
-	  rm -f "$(DESTDIR)$(man5dir)/$$inst"; \
-	done
-install-man8: $(man8_MANS) $(man_MANS)
+	@list='$(man5_MANS)'; test -n "$(man5dir)" || exit 0; \
+	files=`{ for i in $$list; do echo "$$i"; done; \
+	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+	dir='$(DESTDIR)$(man5dir)'; $(am__uninstall_files_from_dir)
+install-man8: $(man8_MANS)
 	@$(NORMAL_INSTALL)
-	test -z "$(man8dir)" || $(mkdir_p) "$(DESTDIR)$(man8dir)"
-	@list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \
-	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
-	for i in $$l2; do \
-	  case "$$i" in \
-	    *.8*) list="$$list $$i" ;; \
-	  esac; \
+	@list1='$(man8_MANS)'; \
+	list2=''; \
+	test -n "$(man8dir)" \
+	  && test -n "`echo $$list1$$list2`" \
+	  || exit 0; \
+	echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
+	$(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
+	{ for i in $$list1; do echo "$$i"; done;  \
+	if test -n "$$list2"; then \
+	  for i in $$list2; do echo "$$i"; done \
+	    | sed -n '/\.8[a-z]*$$/p'; \
+	fi; \
+	} | while read p; do \
+	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; echo "$$p"; \
+	done | \
+	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+	sed 'N;N;s,\n, ,g' | { \
+	list=; while read file base inst; do \
+	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
+	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
+	  fi; \
 	done; \
-	for i in $$list; do \
-	  if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
-	  else file=$$i; fi; \
-	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
-	  case "$$ext" in \
-	    8*) ;; \
-	    *) ext='8' ;; \
-	  esac; \
-	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
-	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
-	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
-	  echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
-	  $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst"; \
-	done
+	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+	while read files; do \
+	  test -z "$$files" || { \
+	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
+	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
+	done; }
+
 uninstall-man8:
 	@$(NORMAL_UNINSTALL)
-	@list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \
-	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
-	for i in $$l2; do \
-	  case "$$i" in \
-	    *.8*) list="$$list $$i" ;; \
-	  esac; \
-	done; \
-	for i in $$list; do \
-	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
-	  case "$$ext" in \
-	    8*) ;; \
-	    *) ext='8' ;; \
-	  esac; \
-	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
-	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
-	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
-	  echo " rm -f '$(DESTDIR)$(man8dir)/$$inst'"; \
-	  rm -f "$(DESTDIR)$(man8dir)/$$inst"; \
-	done
-tags: TAGS
-TAGS:
+	@list='$(man8_MANS)'; test -n "$(man8dir)" || exit 0; \
+	files=`{ for i in $$list; do echo "$$i"; done; \
+	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+	dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
+tags TAGS:
+
+ctags CTAGS:
 
-ctags: CTAGS
-CTAGS:
+cscope cscopelist:
 
 
 distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
-	list='$(DISTFILES)'; for file in $$list; do \
-	  case $$file in \
-	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
-	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
-	  esac; \
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
-	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
-	    dir="/$$dir"; \
-	    $(mkdir_p) "$(distdir)$$dir"; \
-	  else \
-	    dir=''; \
-	  fi; \
 	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -307,7 +407,7 @@ check: check-am
 all-am: Makefile $(MANS)
 installdirs:
 	for dir in "$(DESTDIR)$(man5dir)" "$(DESTDIR)$(man8dir)"; do \
-	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 	done
 install: install-am
 install-exec: install-exec-am
@@ -319,16 +419,22 @@ install-am: all-am
 
 installcheck: installcheck-am
 install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
 mostlyclean-generic:
 
 clean-generic:
 
 distclean-generic:
-	-rm -f $(CONFIG_CLEAN_FILES)
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -347,18 +453,38 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
 
 install-data-am: install-man
 
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
 install-exec-am:
 
+install-html: install-html-am
+
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man: install-man5 install-man8
 
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -377,19 +503,24 @@ ps: ps-am
 
 ps-am:
 
-uninstall-am: uninstall-info-am uninstall-man
+uninstall-am: uninstall-man
 
 uninstall-man: uninstall-man5 uninstall-man8
 
-.PHONY: all all-am check check-am clean clean-generic distclean \
-	distclean-generic distdir dvi dvi-am html html-am info info-am \
-	install install-am install-data install-data-am install-exec \
-	install-exec-am install-info install-info-am install-man \
-	install-man5 install-man8 install-strip installcheck \
-	installcheck-am installdirs maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
-	pdf-am ps ps-am uninstall uninstall-am uninstall-info-am \
-	uninstall-man uninstall-man5 uninstall-man8
+.MAKE: install-am install-strip
+
+.PHONY: all all-am check check-am clean clean-generic cscopelist-am \
+	ctags-am distclean distclean-generic distdir dvi dvi-am html \
+	html-am info info-am install install-am install-data \
+	install-data-am install-dvi install-dvi-am install-exec \
+	install-exec-am install-html install-html-am install-info \
+	install-info-am install-man install-man5 install-man8 \
+	install-pdf install-pdf-am install-ps install-ps-am \
+	install-strip installcheck installcheck-am installdirs \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-generic pdf pdf-am ps ps-am tags-am uninstall \
+	uninstall-am uninstall-man uninstall-man5 uninstall-man8
+
 
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.

src/scripts/Makefile.in

@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.8.5 from Makefile.am.
+# Makefile.in generated by automake 1.13.3 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004  Free Software Foundation, Inc.
+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -14,15 +14,57 @@
 
 @SET_MAKE@
 
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
 VPATH = @srcdir@
+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ../..
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
 install_sh_SCRIPT = $(install_sh) -c
@@ -34,27 +76,71 @@ POST_INSTALL = :
 NORMAL_UNINSTALL = :
 PRE_UNINSTALL = :
 POST_UNINSTALL = :
+build_triplet = @build@
 host_triplet = @host@
 subdir = src/scripts
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
-mkinstalldirs = $(mkdir_p)
+mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/src/config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
 am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(scriptconfdir)"
-binSCRIPT_INSTALL = $(INSTALL_SCRIPT)
-scriptconfSCRIPT_INSTALL = $(INSTALL_SCRIPT)
 SCRIPTS = $(bin_SCRIPTS) $(scriptconf_SCRIPTS)
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
 SOURCES =
 DIST_SOURCES =
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
 AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 AUTOCONF = @AUTOCONF@
 AUTOHEADER = @AUTOHEADER@
 AUTOMAKE = @AUTOMAKE@
@@ -77,7 +163,9 @@ ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
+GREP = @GREP@
 IF_METHOD = @IF_METHOD@
+INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
@@ -88,6 +176,7 @@ LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
 LTLIBOBJS = @LTLIBOBJS@
 MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
 OBJEXT = @OBJEXT@
 OTHER_METHOD = @OTHER_METHOD@
 PACKAGE = @PACKAGE@
@@ -95,6 +184,7 @@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PID_DIR = @PID_DIR@
@@ -103,24 +193,29 @@ SET_MAKE = @SET_MAKE@
 SHELL = @SHELL@
 STRIP = @STRIP@
 VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
-ac_ct_STRIP = @ac_ct_STRIP@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
 am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
 bindir = @bindir@
 build = @build@
 build_alias = @build_alias@
 build_cpu = @build_cpu@
 build_os = @build_os@
 build_vendor = @build_vendor@
+builddir = @builddir@
 datadir = @datadir@
+datarootdir = @datarootdir@
 debug_flags = @debug_flags@
+docdir = @docdir@
+dvidir = @dvidir@
 exec_prefix = @exec_prefix@
 gmp = @gmp@
 host = @host@
@@ -128,21 +223,29 @@ host_alias = @host_alias@
 host_cpu = @host_cpu@
 host_os = @host_os@
 host_vendor = @host_vendor@
+htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
 libdir = @libdir@
 libexecdir = @libexecdir@
+localedir = @localedir@
 localstatedir = @localstatedir@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
+psdir = @psdir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
 sysconfdir = @sysconfdir@
 target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
 bin_SCRIPTS = ntk-wifi
 scriptconfdir = $(sysconfdir)
 scriptconf_SCRIPTS = ip_masquerade.sh tc_shaper.sh rc.ntk
@@ -153,14 +256,14 @@ $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
 	    *$$dep*) \
-	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
-		&& exit 0; \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  src/scripts/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --gnu  src/scripts/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu src/scripts/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu src/scripts/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -178,76 +281,111 @@ $(top_srcdir)/configure:  $(am__configure_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 install-binSCRIPTS: $(bin_SCRIPTS)
 	@$(NORMAL_INSTALL)
-	test -z "$(bindir)" || $(mkdir_p) "$(DESTDIR)$(bindir)"
-	@list='$(bin_SCRIPTS)'; for p in $$list; do \
+	@list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  if test -f $$d$$p; then \
-	    f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
-	    echo " $(binSCRIPT_INSTALL) '$$d$$p' '$(DESTDIR)$(bindir)/$$f'"; \
-	    $(binSCRIPT_INSTALL) "$$d$$p" "$(DESTDIR)$(bindir)/$$f"; \
-	  else :; fi; \
-	done
+	  if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n' \
+	    -e 'h;s|.*|.|' \
+	    -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) { files[d] = files[d] " " $$1; \
+	      if (++n[d] == $(am__install_max)) { \
+		print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
+	    else { print "f", d "/" $$4, $$1 } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	     if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	     test -z "$$files" || { \
+	       echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	       $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	     } \
+	; done
 
 uninstall-binSCRIPTS:
 	@$(NORMAL_UNINSTALL)
-	@list='$(bin_SCRIPTS)'; for p in $$list; do \
-	  f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
-	  echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(bindir)/$$f"; \
-	done
+	@list='$(bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	       sed -e 's,.*/,,;$(transform)'`; \
+	dir='$(DESTDIR)$(bindir)'; $(am__uninstall_files_from_dir)
 install-scriptconfSCRIPTS: $(scriptconf_SCRIPTS)
 	@$(NORMAL_INSTALL)
-	test -z "$(scriptconfdir)" || $(mkdir_p) "$(DESTDIR)$(scriptconfdir)"
-	@list='$(scriptconf_SCRIPTS)'; for p in $$list; do \
+	@list='$(scriptconf_SCRIPTS)'; test -n "$(scriptconfdir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(scriptconfdir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(scriptconfdir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  if test -f $$d$$p; then \
-	    f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
-	    echo " $(scriptconfSCRIPT_INSTALL) '$$d$$p' '$(DESTDIR)$(scriptconfdir)/$$f'"; \
-	    $(scriptconfSCRIPT_INSTALL) "$$d$$p" "$(DESTDIR)$(scriptconfdir)/$$f"; \
-	  else :; fi; \
-	done
+	  if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n' \
+	    -e 'h;s|.*|.|' \
+	    -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) { files[d] = files[d] " " $$1; \
+	      if (++n[d] == $(am__install_max)) { \
+		print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
+	    else { print "f", d "/" $$4, $$1 } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	     if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	     test -z "$$files" || { \
+	       echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(scriptconfdir)$$dir'"; \
+	       $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(scriptconfdir)$$dir" || exit $$?; \
+	     } \
+	; done
 
 uninstall-scriptconfSCRIPTS:
 	@$(NORMAL_UNINSTALL)
-	@list='$(scriptconf_SCRIPTS)'; for p in $$list; do \
-	  f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
-	  echo " rm -f '$(DESTDIR)$(scriptconfdir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(scriptconfdir)/$$f"; \
-	done
-uninstall-info-am:
-tags: TAGS
-TAGS:
+	@list='$(scriptconf_SCRIPTS)'; test -n "$(scriptconfdir)" || exit 0; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	       sed -e 's,.*/,,;$(transform)'`; \
+	dir='$(DESTDIR)$(scriptconfdir)'; $(am__uninstall_files_from_dir)
+tags TAGS:
+
+ctags CTAGS:
 
-ctags: CTAGS
-CTAGS:
+cscope cscopelist:
 
 
 distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
-	list='$(DISTFILES)'; for file in $$list; do \
-	  case $$file in \
-	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
-	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
-	  esac; \
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
-	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
-	    dir="/$$dir"; \
-	    $(mkdir_p) "$(distdir)$$dir"; \
-	  else \
-	    dir=''; \
-	  fi; \
 	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -256,7 +394,7 @@ check: check-am
 all-am: Makefile $(SCRIPTS)
 installdirs:
 	for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(scriptconfdir)"; do \
-	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 	done
 install: install-am
 install-exec: install-exec-am
@@ -268,16 +406,22 @@ install-am: all-am
 
 installcheck: installcheck-am
 install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
 mostlyclean-generic:
 
 clean-generic:
 
 distclean-generic:
-	-rm -f $(CONFIG_CLEAN_FILES)
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -296,18 +440,38 @@ dvi-am:
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
 
 install-data-am: install-scriptconfSCRIPTS
 
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
 install-exec-am: install-binSCRIPTS
 
+install-html: install-html-am
+
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -326,19 +490,23 @@ ps: ps-am
 
 ps-am:
 
-uninstall-am: uninstall-binSCRIPTS uninstall-info-am \
-	uninstall-scriptconfSCRIPTS
-
-.PHONY: all all-am check check-am clean clean-generic distclean \
-	distclean-generic distdir dvi dvi-am html html-am info info-am \
-	install install-am install-binSCRIPTS install-data \
-	install-data-am install-exec install-exec-am install-info \
-	install-info-am install-man install-scriptconfSCRIPTS \
-	install-strip installcheck installcheck-am installdirs \
-	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-generic pdf pdf-am ps ps-am uninstall uninstall-am \
-	uninstall-binSCRIPTS uninstall-info-am \
-	uninstall-scriptconfSCRIPTS
+uninstall-am: uninstall-binSCRIPTS uninstall-scriptconfSCRIPTS
+
+.MAKE: install-am install-strip
+
+.PHONY: all all-am check check-am clean clean-generic cscopelist-am \
+	ctags-am distclean distclean-generic distdir dvi dvi-am html \
+	html-am info info-am install install-am install-binSCRIPTS \
+	install-data install-data-am install-dvi install-dvi-am \
+	install-exec install-exec-am install-html install-html-am \
+	install-info install-info-am install-man install-pdf \
+	install-pdf-am install-ps install-ps-am \
+	install-scriptconfSCRIPTS install-strip installcheck \
+	installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
+	pdf-am ps ps-am tags-am uninstall uninstall-am \
+	uninstall-binSCRIPTS uninstall-scriptconfSCRIPTS
+
 
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.